Skip to main content
Help
Редактирование шага 25 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Open the MacBook Pro a little wider than 90 degrees, and place it on end, as shown.

While holding the display and upper case together with your left hand, remove the remaining T8 Torx screw from the lower display bracket.

Be sure to hold the display and upper case together with your left hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.

Remove the last remaining T8 Torx screw securing the display to the upper case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.