Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The top plastic piece holding the release button should be held on only by a red-and-black wire connector to the logic board.

Remove the connector from the logic board and detach the release button housing from the camera.

Ваш вклад лицензируется под свободной лицензией Creative Commons.