Перейти к основному содержанию
Помощь
Редактирование шага 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The two remaining strips (4L and 4R) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.

Grasp the red film pull tab on the 4R adhesive strip and pull to remove the backing from the strip.

Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge.

Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac.

Ваш вклад лицензируется под свободной лицензией Creative Commons.