Skip to main content
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Peeling up yellow tape as necessary, remove the following 8 screws:

One 4.5 mm Phillips on the right side of the heat sink.

Three 6 mm Phillips near the display.

Two large 7.5 mm Phillips with springs (don't forget to remove the springs). If the springs are not releasing, needle nose pliers can help get this done.

Two 13 mm screws from the left side of the heat sink and the right side of the fan.

Ваш вклад лицензируется под свободной лицензией Creative Commons.