Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following five screws:

One 3 mm Phillips near the screen latch (mind the big magnet on the screen latch).

Two 3.5 mm Phillips attaching the EMI fingers to the metal framework.

One 10 mm Phillips near the optical drive.

One 14 mm long 4 mm standoff in the upper left corner. You can remove this standoff either with a 4 mm nut driver or needlenose pliers.

Lift the EMI fingers above the battery connector away from the metal framework.

Ваш вклад лицензируется под свободной лицензией Creative Commons.