Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use your spudger to pry the left side of the front display bezel away from the display assembly.

During reassembly, be sure the small plastic pegs on the front display bezel (shown in red) mate up with the holes in the rear display bezel. Failure to do so will prevent the front display bezel from sitting flush against the rear bezel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.