Skip to main content
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to pry the front display bezel off the top edge of the display assembly.

It may be helpful to insert and twist the flat end of your spudger to enlarge the gap between the front & rear display bezels as you work your way around the edge of the display.

Continue separating until the top edge of the front display bezel is free from the display assembly.

Be careful when prying near the iSight camera board, as it has exposed circuitry and is delicate.

Ваш вклад лицензируется под свободной лицензией Creative Commons.