Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use your spudger to pry the left side of the front display bezel away from the display assembly.

Carefully pry up the area behind the left clutch hinge.

During reassembly, be sure the small plastic pegs on the front display bezel mate up with the holes in the rear display bezel (shown in red). Failure to do so will prevent the front display bezel from sitting flush against the rear bezel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.