Помощь
Редактирование шага 11 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 32 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the flat end of a spudger to snap the front portion of the Touch ID cable bracket down over the cable connector.

If the bracket does not snap down flush, you may need to remove the bracket and slide it over the cable connector again for a better fit.

Ваш вклад лицензируется под свободной лицензией Creative Commons.