Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the two 3.1 mm Phillips screws securing the iSight holder to the top of the display.

Make sure to remove the screws securing the metal bracket to the edge of the display and not the screws in the iSight board itself.

If you are replacing your screen with a new one, your part may not have these two screw holes. That's OK. You can still reassemble your computer without those screws in place.

Ваш вклад лицензируется под свободной лицензией Creative Commons.