Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 18 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

Pry from the top and bottom of the connector bracket—there isn't as much of an overhang on the sides, and you may damage the connector.

Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.

Remove the metal clip covering the antenna connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons.