Перейти к основному содержанию
Редактирование шага 10 —

Тип шага:

Перетащите чтобы изменить порядок

Slip the replacement bracket back under the oil feed tube. It can be a bit of a puzzle getting it in just the right way, but you'll get it.

Then start the upper three bolts but leave some room for the bracket to move so you can start the lower bolt.

Start the lower bolt by hand. You'll need to do it by feel - just take your time. Make sure to get it in part way by hand before switching to your wrench to avoid cross threading it.

Finishing up by tightening down all the bolts.

Ваш вклад лицензируется под свободной лицензией Creative Commons.