Перейти к основному содержанию
Редактирование шага 8 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Slide the point of a spudger behind the shield plate to gently lift the home button cable up off of the front panel.

If the cable doesn't peel away easily, use a little heat from an iOpener or hair dryer to soften the adhesive underneath.

Remove the LCD shield plate.

During reassembly, make sure to seat the home button connector on the shield behind the small indentation in the plastic.

Ваш вклад лицензируется под свободной лицензией Creative Commons.