Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Begin by removing the four designated 1.33x2.00 mm Phillips screws with the screwdriver, as shown in the first picture.

Once the screws are removed, use a pair of tweezers or the spudger to remove the battery connector.

Pull the battery connector up as shown in the second picture.

Once the battery connector is removed, you can remove the battery using the spudger as shown in the third picture.

Ваш вклад лицензируется под свободной лицензией Creative Commons.