Перейти к основному содержанию
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Unscrew the four outer 1.0 mm screws with a Phillips-Head screwdriver.

Screws will be magnetized in position and will require the use of tweezers to be removed.

Push down gently on the battery case cover and slide it in the direction the arrows indicate. Remove the batteries.

Unscrew the 0.6 mm screw located in the center of the battery case.

Keep 10 mm and 0.6 mm screws separate from each other for reassembly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.