Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Grasp the controller by the battery compartment and the headphone jack.

Lift the battery compartment away from the headphone jack, separating the rear case from the front case and logic board.

The battery contact springs are held in place by slots in the battery housing in the rear case. Be sure to realign them properly during reassembly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.