Skip to main content
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the black protective piece of plastic by sliding it upwards.

Remove the two 3.5mm Torx #5 screws holding the protective plastic down on along the sides.

A center 3.5mm Torx screw will be covered by "VOID" sticker.

Either remove the sticker or jam the screwdriver into the screw, and remove the screw.

Remove the protective panel by sliding it upwards.

Ваш вклад лицензируется под свободной лицензией Creative Commons.