Skip to main content
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Squeeze the heat sink thermal sensor cable between your thumb and the tip of a spudger.

Lift the spudger upward to lift the thermal sensor connector out of its socket on the logic board.

The early 2011 model may not have a thermal sensor connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons.