Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

This step is only for glossy display machines. If you have an anti-glare display, skip this step.

Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.

One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

Lift the camera cable retainer out of the upper case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.