Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

This step is only required if you have an anti-glare display.

Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.

One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.

Lift the Bluetooth board/cable retainer assembly out of the upper case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.