Skip to main content
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 19 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Tilt the battery away from the logic board enough to access the battery cable connector.

Pull the battery cable connector away from its socket on the logic board and remove the battery from the upper case.

Pull the battery cable connector away from the center of the logic board.

If you're installing a new battery, you should calibrate it after installation:

Charge it to 100%, and then keep charging it for at least 2 more hours. Next, unplug and use it normally to drain the battery. When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery. Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

Ваш вклад лицензируется под свободной лицензией Creative Commons.