Перейти к основному содержанию
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the spudger to push the USB port on the bottom of the device inward.

Hold the device firmly between two fingers. Be sure you aren't holding down the top of the device; the circuit board will slide out of the shell through that end.

The plastic LCD cover and the key pad will now be free; they were held in place by the tension between the case and the internal circuit board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.