Перейти к основному содержанию
Редактирование шага 2 —

Тип шага:

Перетащите чтобы изменить порядок

The fan is held onto the heat sink with four sturdy plastic clips. By prying the two exposed clips up out of their channel in the heat sink, you'll be able to tilt the fan up and off of the heat sink.

Use a spudger and plastic opening tool to gently and evenly pry the right clip up out of its channel in the heat sink.

Be careful not to put pressure downward onto the motherboard, or to pull the heat sink up against the motherboard.

Ваш вклад лицензируется под свободной лицензией Creative Commons.