Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 8 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

There is a hidden screw located in the middle of the controller behind the label.

Use a screwdriver and punch a hole directly in the center of the label.

You may also lift the label if you do not want to puncture it.

Remove the five 10mm screws located on the back of the controller using the T8 Security Torx Screwdriver.

Ваш вклад лицензируется под свободной лицензией Creative Commons.