Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the bumpers by prying them off of the pegs that secure them, using a spudger. They are located on the front and back of the controller.

A standard nylon spudger is recommended for this step. Using a metal spudger near the motherboard as shown risks damaging your device.

Ваш вклад лицензируется под свободной лицензией Creative Commons.