Skip to main content
Помощь
Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

With both ribbons out of the way, you can now lift the motherboard off of the tablet with your hand.

The camera is attached to the back side of the motherboard via a ribbon cable.

Use a spudger or your fingernail to disconnect the camera from the motherboard.

There is a small board that comes off easily with the camera. It is attached to the camera with a ZIF connector, and will need to be swapped over to the replacement camera.

Ваш вклад лицензируется под свободной лицензией Creative Commons.