Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

With the motherboard facing you, use the pointy end of your Spudger to gently separate the two speaker's connectors.

This connector type requires being lifted out of place, not pulled. Accidentally pulling may damage the wires.

During reassembly, make sure the speaker's connectors are not pushed behind the motherboard.

Use your #00 Phillips Screwdriver to remove the seven 2 mm screws.

Ваш вклад лицензируется под свободной лицензией Creative Commons.