Перейти к основному содержанию
Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

Lift up the trackpad ribbon cable so that it is not covering the speaker wire.

Lift up the two pieces of metallic tape so that they no longer cover the speaker wire.

When reassembling the device, make sure to lay down the metallic tape in the same place it was prior to disassembly. The tape serves as a connector for certain electrical circuits that should not be disconnected.

Ваш вклад лицензируется под свободной лицензией Creative Commons.