Skip to main content
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Unscrew the two 3mm T5 Torx screws securing the daughterboard to the device.

Use a pair of tweezers to disconnect the vibrator cable. It will lift straight up from the daughterboard connector.

Use your fingers to lift the daughterboard upward and out of the device.

Ваш вклад лицензируется под свободной лицензией Creative Commons.