Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Тип шага:

Перетащите чтобы изменить порядок

Using the picks located in the iOpener Kit, insert the picks into the corners of the tablet, and move it back and forth along the sides of tablet.

Do this for every corner of the tablet until it is possible to pull the LCD from the display assembly with your finger.

Carefully remove the LCD from the display assembly because there is a ribbon located at the bottom that could be ripped with force.

The LCD should come completely free from the back assembly now by just leading the ribbon through the opening in the display assembly.

Ваш вклад лицензируется под свободной лицензией Creative Commons.