Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Throughout the following procedure, you'll be sliding thin plastic cards between the battery and rear case of the iPad to separate the adhesive securing the battery in place. Be careful to keep the cards as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.

Flip the iPad back over and insert a plastic card under the battery cell nearest the logic board and right speaker.

If you encounter significant resistance, re-heat the iOpener and repeat the previous step to give the adhesive more time to soften.

Ваш вклад лицензируется под свободной лицензией Creative Commons.