Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

Place the floor jack on the jacking point, located on the passenger side behind the front wheel.

depending on the floor jack, either twist or move the leaver up and down to raise the car

Raise the car high enough to place the jack stand under the car. Make sure the stand will have solid contact with the car frame.

The jacking point has a lip and is at the edge of the car (boxed in the photo). The lip of the jacking point should fit into the opening on the jack.

Slowly lower the car onto the jack stand by using the floor jack.

When the car is secured on the jack stands, remove the floor jack.

Do not use the floor jack to keep the car propped up

Ваш вклад лицензируется под свободной лицензией Creative Commons.