Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

If the back case has already been removed, carefully place it on the WorkPad to protect the circuitry inside from the heat.

Using the hair dryer, slowly heat the edges of the device. Spend at least 1 minute on each side, thoroughly heating the case.

The LCD/Digitizer combo is very sensitive to heat, and can easily be ruined if it is directly exposed to the hair dryer. Verify that the screen is face down.

Ваш вклад лицензируется под свободной лицензией Creative Commons.