Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Тип шага:

Перетащите чтобы изменить порядок

Grab an old torch (or flashlight for those over the pond) and pull the light bulb out. This will serve as our load. (Note: This needs to be an incandescent bulb)

Connect the bulb across the two terminals of the cell without letting the terminals touch. (A set of crocodile clip leads makes this a breeze). The bulb should light.

Connect your voltmeter too and watch the voltage fall. Disconnect the bulb when it reaches around 3.5V and proceed to charging (Step 6).

Ваш вклад лицензируется под свободной лицензией Creative Commons.