Skip to main content
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

In order to check and recondition the battery's cell we'll need to get at it directly, bypassing the control systems. This means we will have NO short-circuit or overload protection, so take extra care.

Peel back the black insulation to expose the cell's terminals (Never let these points become electrically connected) and check with a voltmeter.

If you see a voltage greater than about 4V, the RAID Card is charging the battery but it can't tell when it's finished. Proceed to step 5.

If you see a voltage significantly less than 3.6V, then the RAID Card is not charging the battery. Proceed to step 6.

Ваш вклад лицензируется под свободной лицензией Creative Commons.