Skip to main content
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the two 3.5mm Torx T4 screws securing the headphone jack cable/cover.

Using tweezers, disconnect the headphone jack cable/cover and remove it. The headphone jack will stay where it is.

The metal shield is attached to the headphone jack.

Ваш вклад лицензируется под свободной лицензией Creative Commons.