Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Insert the tip of a metal probe into the hole molded into the logic board retainer nearest the logic board.

Pry the retainer first away from the front of the front case, then pull it away from the side of the front case.

Remove the logic board retainer from the Shuffle.

Ваш вклад лицензируется под свободной лицензией Creative Commons.