Помощь
Редактирование шага 1 —

Тип шага:

Перетащите чтобы изменить порядок

First off unplug the monitor from power as well as from the back of the computer. Find a flat surface and lay the monitor on its face so that you can get to the back of it. The screws that hold the monitor stand on are covered by a small plastic bezel ( shown in photo with the red arrow). This is held on with just pressure and if you squeeze at the points mark with a blue circle it should pop free and the bezel can be removed.

Ваш вклад лицензируется под свободной лицензией Creative Commons.