Помощь
Редактирование шага 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a heat gun or hair dryer to soften the adhesive under the black strip along the left side of the front glass panel.

Attach a suction cup along the left side of the front glass panel.

Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.

Continue working along the left edge of the front display glass until it is separated from the display.

Ваш вклад лицензируется под свободной лицензией Creative Commons.