Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

It will be necessary to slide the small clear plastic cable retainer (boxed in red) glued to the logic board out of the way before disconnecting the camera cable. Be careful not to break any components off the board as you slide it away from the camera cable connector.

Pull the camera cable connector toward the optical drive to disconnect it from the logic board.

This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.

Ваш вклад лицензируется под свободной лицензией Creative Commons.