Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 18 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.

Some devices may have two screws, one of which holds down the contact pad which is located above the screw indicated in red in the photo.

Ваш вклад лицензируется под свободной лицензией Creative Commons.