Перейти к основному содержанию
Помощь
Редактирование шага 4 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Gently wedge the flat end of the spudger between the back case and the wrist-strap mount.

The wrist-strap mount is the thin metal piece on the side of the camera. Your camera may have the wrist-strap attached, but you will not need to remove it to continue.

Carefully pry the back case away from the camera and then gently lift it off.

Ваш вклад лицензируется под свободной лицензией Creative Commons.