Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Тип шага:

Перетащите чтобы изменить порядок

Do not completely lift the circuit board off the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off the camera will break these soldering points.

Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge.

Locate the white ribbon cable attached to the underside of the main circuit board.

Gently remove the white ribbon cable from the connector.

Ваш вклад лицензируется под свободной лицензией Creative Commons.