Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points.

In a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldering points.

Gently detach the white ribbon cable from the underside of the main circuit board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.