Перейти к основному содержанию
Помощь
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the soldering kit to desolder the LCD Display from the orange strip which is connected to the back of the camera.

Use the soldering kit to attach your new LCD Display in place of the old one.

When soldering, allow enough slack in the orange strip so the LCD Display will lie flat, and the white bar will lie parallel with the electronic components embedded in the green panel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.