Перейти к основному содержанию
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Using Spudger tool, pry the front case from the camera's components.

Use your fingers to carefully pull the back case from the front case.

Cut the black and red wires connecting front case to the body of the camera.

Be careful to ensure that nothing gets caught, and separate the front case from the camera.

To put the new front case back on, solder the wires of the new front case to the components of the camera.

Ваш вклад лицензируется под свободной лицензией Creative Commons.