Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 23 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove two Phillips screws securing the battery connector bracket to the logic board, of the following lengths:

One 2.9 mm screw

One 2.3 mm screw

Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

Ваш вклад лицензируется под свободной лицензией Creative Commons.