Skip to main content
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the single short black Torx screw anchoring the metal framework to the lower casing.

Use a five millimeter nut driver or needle-nose pliers to remove the small metal nut from the bolt in the laptop's back left corner.

If you're using pliers, be extremely careful not to let them slip or you may damage the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.