Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 38 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following 3 screws:

One 11 mm Phillips#00 in the middle of the case. (Head: 5mm dia. x .75mm thick)

Two 14.5 mm Phillips #00 (Head: 5mm dia. x .75mm thick)

If the screws stick in the case, you can use a magnetized screwdriver to draw them out.

The shorter of the three screws goes in the middle.

Ваш вклад лицензируется под свободной лицензией Creative Commons.