Перейти к основному содержанию
Помощь
Редактирование шага 6 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Disconnect the three antenna cables from the Airport card. There may be a square foam piece over the logic board connector.

Disconnect the inverter cable from the socket by inserting the spudger between the right or left edge of the plug and the socket, and prying gently upward. (Do NOT pry the entire socket off the board... you must pull the plug from within the socket.) The inverter plug lifts vertically out of the socket. Do not pull it in the direction of the connecting wires or you will tear the socket off.

If you have a MacBook Core 2 Duo Santa Rosa/Penryn, there are only two antenna cables and the black inverter cable is in a different location.

Ваш вклад лицензируется под свободной лицензией Creative Commons.